deenfresitcntr
WDGA 36E RS485

磁性绝对值编码器, RS485 WDGA 36E,
空心轴(盲孔), 法兰 Ø 36mm

16位/32位 单圈/多圈;
空心轴(盲孔): Ø 12,14或15mm;
带紧定套 : Ø 8,10mm;
CRC校验

数据手册 General technical data absolute encoders RS485 (PDF 294 kB)
Drehgeber WDGA36ERS485-K15
特点
  • Endra®多圈技术:免维护、无污染
  • RS485
  • 单圈/多圈(ST+MT最大32位)
  • 具备32位处理器的前瞻性技术
  • 双色LED指示运行状态
  • CRC校验
产品详细说明
法兰
空心轴(盲孔)
外壳
Ø 36 mm
不锈钢
分辨率
单圈分辨率

最大65,536步/圈(16位)

多圈分辨率

高达32位

轴径
Ø 8 mm
说明: 使用空心轴套管
最小插入深度: 10 mm
最大插入深度: 14.5 mm
轴允许最大负载径向: 80 N
轴允许最大负载轴向: 50 N
Ø 10 mm
说明: 使用空心轴套管
最小插入深度: 10 mm
最大插入深度: 14.5 mm
轴允许最大负载径向: 80 N
轴允许最大负载轴向: 50 N
Ø 12 mm
最小插入深度: 10 mm
最大插入深度: 14.5 mm
轴允许最大负载径向: 80 N
轴允许最大负载轴向: 50 N
Ø 14 mm
最小插入深度: 10 mm
最大插入深度: 14.5 mm
轴允许最大负载径向: 80 N
轴允许最大负载轴向: 50 N
Ø 15 mm
最小插入深度: 10 mm
最大插入深度: 14.5 mm
轴允许最大负载径向: 80 N
轴允许最大负载轴向: 50 N
最大运行速度
6000 rpm
供电电压
4.75 VDC ~ 32 VDC
消耗电流: typ. 50 mA
功耗: max. 0.5 W
4.75 VDC ~ 5.5 VDC
消耗电流: typ. 80 mA
功耗: max. 0.44 W
工作温度
-40°C ~ +85°C
存储温度
-40°C ~ +100°C
防护等级
外壳: IP65, IP67; 主轴密封: IP65; 电缆的型号 K1: IP40
STEP查看器/STEP数据:

您需要的STEP文件没有被列出:
需要STEP文件 这里

描述
L2 轴向, 屏蔽线与编码器外壳连接
分配
S- (GND)白色
S+ (DCin)棕色
A (DATA+)灰色
B (DATA-)粉色
PRESET蓝色
DIR红色
屏蔽外壳
STEP查看器/STEP数据:

您需要的STEP文件没有被列出:
需要STEP文件 这里

描述
L3 径向, 屏蔽线与编码器外壳连接
分配
S- (GND)白色
S+ (DCin)棕色
A (DATA+)灰色
B (DATA-)粉色
PRESET蓝色
DIR红色
屏蔽外壳
STEP查看器/STEP数据:

您需要的STEP文件没有被列出:
需要STEP文件 这里

描述
K1 径向, 屏蔽线未与编码器外壳连接
分配
S- (GND)白色
S+ (DCin)棕色
A (DATA+)灰色
B (DATA-)粉色
PRESET蓝色
DIR红色
屏蔽外壳 n.c.
STEP查看器/STEP数据:

您需要的STEP文件没有被列出:
需要STEP文件 这里

描述
CB8 轴向, 8-pin, 屏蔽线与编码器外壳连接
分配
S- (GND)1
S+ (DCin)2
A (DATA+)5
B (DATA-)6
PRESET7
DIR8
屏蔽外壳
STEP查看器/STEP数据:

您需要的STEP文件没有被列出:
需要STEP文件 这里

描述
CC8 径向, 8-pin, 屏蔽线与编码器外壳连接
分配
S- (GND)1
S+ (DCin)2
A (DATA+)5
B (DATA-)6
PRESET7
DIR8
屏蔽外壳
General technical Data  and safety instructions absolute encoders WDGA RS485
General technical Data and safety instructions absolute encoders WDGA RS485

Motor feedback installation solutions
Motor feedback installation solutions with EnDra® Technology

...to be directly installed in motors.

Handout Absolute encoders WDGA
Handout Absolute encoders WDGA

  • Absolute encoders with flange Ø 36 mm / Ø 58 mm
  • Single-/Multiturn (16/43 bit)
  • Ground-breaking technology 32 Bit processor
  • Very high shaft loading, IP67
  • EnDra® Multiturn technology: No gears, no battery
  • QuattroMag® Singleturn technology: High precision +/- 0,0878°

Short-Catalogue Encoders and systems
Short-Catalogue Encoders and systems

  • Incremental and absolute encoders
  • Digital shaft copying
  • Made in Germany
  • Motorfeedback
  • Position Measurement Systems

Anwendungsbericht Prüfstandbau - Application report Test Bench
Test Bench

WDGA absolute encoder as reference sensor

HALT Test
The HALT-Test

Delivery times and service
Delivery times and service

of Wachendorff Automation GmbH & Co. KG

Assembly instructions for WDGA absolute encoder RS485
Assembly instructions for WDGA absolute encoder RS485

EC Konformitätserklärung Drehgeber : EC declaration of conformity encoder
EU declaration of conformity absolute encoder WDGA 2.0 CAN/SSI

for Wachendorff Automation GmbH & Co. KG.

UKCA declaration of conformity absolute encoder WDGA 2.0 CAN/SSI
UKCA declaration of conformity absolute encoder WDGA 2.0 CAN/SSI

for Wachendorff Automation GmbH & Co. KG.

UL Certificates for Wachendorff Automation Products 2014-03-28
UL Certificates

for Wachendorff Automation products.

REACH regulation
REACH- and RoHS regulation of the EU

Informationen

ISO Certificate DIN EN 9001:2015
ISO Certificate DIN EN 9001:2015

KI867EIA Drehgeber Kabeldose
KI-8-67-EIA

母头连接器 KI-8-67-EIA :
适用于连接器出线的 CB8/CC8, 8pin, IP67, WDGA RS485

直头母头连接器带屏蔽电缆,屏蔽连接

KIA867EIA Drehgeber Kabeldose
KIA-8-67-EIA

母头连接器 KIA-8-67-EIA:
适用于连接器出线的 CB8/CC8, 8pin, IP67, WDGA RS485

弯头母头连接器带屏蔽电缆,屏蔽连接

WDGWA10M06 Drehgeber encoder Wellenadapter shaft adapter
WDGWA10M06

轴适配器 M6 WDGWA10M06

可用于空心轴通孔编码器和空心轴盲孔编码器Ø 10 mm,
或联轴器直径10mm时,
M6线

WDGWA10M08 Drehgeber Wellenadapter
WDGWA10M08

轴适配器 M8 WDGWA10M08

可用于空心轴通孔编码器和空心轴盲孔编码器Ø 10 mm,
或联轴器直径10mm时,
M8线

WDGWA10M10 Drehgeber Wellenadapter
WDGWA10M10

轴适配器 M10 WDGWA10M10

可用于空心轴通孔编码器和空心轴盲孔编码器Ø 10 mm,
或联轴器直径10mm时,
M10线

WDGWA10M12 Drehgeber Wellenadapter
WDGWA10M12

轴适配器 M12 WDGWA10M12

可用于空心轴通孔编码器和空心轴盲孔编码器Ø 10 mm,
或联轴器直径10mm时,
M12线

STEP file: WDGWA10M12.stp

WDGWA10M14 Drehgeber Wellenadapter
WDGWA10M14

轴适配器 M14 WDGWA10M14

可用于空心轴通孔编码器和空心轴盲孔编码器Ø 10 mm,
或联轴器直径10mm时,
M14线

WDGWA10M16 Drehgeber Wellenadapter
WDGWA10M16

轴适配器 M16 WDGWA10M16

可用于空心轴通孔编码器和空心轴盲孔编码器Ø 10 mm,
或联轴器直径10mm时,
M16线

STEP file: WDGWA10M16.stp

WDGWA10M20 Drehgeber Wellenadapter
WDGWA10M20

轴适配器 M20 WDGWA10M20

可用于空心轴通孔编码器和空心轴盲孔编码器Ø 10 mm,
或联轴器直径10mm时,
M20线

编码器综合技术参数

绝对值编码器技术参数

电气连接

电缆出线
连接器
接线盖
###field_abs_ah_bestcode###

您选择的订货型号

单圈多圈接口软件编码电压电流隔离接线方式
WDGA 36EEIAB0
distributors
For further information please contact our local distributor.
Here you find a list of our distributors worldwide
您希望获取产品的报价或者希望我们回电。 Yes
联系我们