磁性绝对值编码器, PROFIBUS-DP WDGA 58A
总线盖带夹紧固定接线端(PG电缆密封压盖)或总线盖 3x M12x1
实心轴编码,
同步法兰 Ø 58mm
14位/39位 单圈/多圈;
轴:Ø 6mm, Ø 8mm, Ø 10mm, Ø 3/8"
协议 PROFIBUS-DPV2
设备子协议可切换,Class3,4
线驱动:电流隔离 (RS485)
- Endra® 技术:免维护、无污染
- PROFIBUS,多圈或者单圈
- 带总线盖的紧凑型设计
- 单圈/多圈(最大14位/39位)
- 具备32位处理器的前瞻性技术
- 双色LED指示运行状态和总线状态
- 轴最大负载可达径向220N,轴向120N
- 设备子协议可切换,Class3,4
最大16,384步/圈(14位)
多圈分辨率最大达39位
说明: 建议: 注意: AAO=整体防护IP67
轴长: 12 mm
轴允许最大负载径向: 125 N
轴允许最大负载轴向: 120 N
说明: 建议: 注意: AAO=整体防护IP67
轴长: 19 mm
轴允许最大负载径向: 125 N
轴允许最大负载轴向: 120 N
轴长: 20 mm
轴允许最大负载径向: 220 N
轴允许最大负载轴向: 120 N
说明: 建议: 注意: AAO=整体防护IP67
轴长: 20 mm
轴允许最大负载径向: 220 N
轴允许最大负载轴向: 120 N
消耗电流: typ. 100 mA (24 VDC)
功耗: max. 2.5 W
组态软件
软件下载
描述 | |
---|---|
BP1 | 总线盖带夹紧固定接线端(PG电缆密封压盖) |
您需要的STEP文件没有被列出:
需要STEP文件 这里
描述 | |
---|---|
BP2 | 总线盖 3x M12x1 |
- Compact design
- Very high shaft loading
- Can be connected flexibly
- Can be switched between class 3 and 4
- Absolute encoders with flange Ø 36 mm / Ø 58 mm
- Single-/Multiturn (16/43 bit)
- Ground-breaking technology 32 Bit processor
- Very high shaft loading, IP67
- EnDra® Multiturn technology: No gears, no battery
- QuattroMag® Singleturn technology: High precision +/- 0,0878°
- Incremental and absolute encoders
- Digital shaft copying
- Made in Germany
- Motorfeedback
- Position Measurement Systems
of Wachendorff Automation GmbH & Co. KG
GSD file for Class4 encoder release V1.2 WDGA absolut with Profibus DP (up to DPV2).
By downloading and using software and apps
from this homepage, I agree to the GTC and
the supplementary software clause.
Demo program (for S7 controllers) for Class4 encoder WDGA absolute with Profibus DP.
The demo program is just an example.
By downloading and using software and apps
from this homepage, I agree to the GTC and
the supplementary software clause.
Declaration from the PROFIBUS-Nutzerorganisation for the WDGA PROFIBUS for Wachendorff Automation GmbH & Co. KG
for Wachendorff Automation products.
Informationen
接头型联轴器 ST27
用于与轴直径6毫米或10毫米编码器。
切口型联轴器 PK20
用于与轴直径6毫米编码器。
切口型联轴器 PK24
用于与轴直径6毫米,8毫米或10毫米编码器。
弹簧垫圈联轴器 FSK22
用于与轴直径6毫米,8毫米或12毫米编码器。
螺旋联轴器 WK22
用于与轴直径6毫米编码器。
螺旋联轴器 WK32
用于与轴直径6毫米或10毫米编码器。
波纹管联轴器 BK29
用于与轴直径6毫米,8毫米,10毫米或12毫米*编码器。
Max. offset of shafts radial: ± 0,25 mm or ± 0,30 mm*
Torsion spring stiffness: 150 Nm/rad or 130 Nm/rad*
波纹管联轴器 FB29B
用于与轴直径4毫米,6毫米,8毫米,10毫米或12毫米编码器。
弹性联轴器 DSK29
用于与轴直径6毫米,8毫米或10毫米编码器。
No moving parts, thermally and electrically insulating, smooth running, maintenance-free.
Good resistance to
Gasoline, oil, benzene, toluene, aromatic and non aromatic hydrocarbons, alcohols, glycols, solvents and many chemicals.
弹性联轴器 DSK38
用于与轴直径6毫米,8毫米,10毫米或12毫米编码器。
No moving parts, thermally and electrically insulating, smooth running, maintenance-free.
Good resistance to
Gasoline, oil, benzene, toluene, aromatic and non aromatic hydrocarbons, alcohols, glycols, solvents and many chemicals.
弹性联轴器 DSK48
用于与轴直径10毫米,12毫米或14毫米编码器。
No moving parts, thermally and electrically insulating, smooth running, maintenance-free.
Good resistance to
Gasoline, oil, benzene, toluene, aromatic and non aromatic hydrocarbons, alcohols, glycols, solvents and many chemicals.
Here you find a list of our distributors worldwide