磁性绝对值编码器, PROFIBUS-DP WDGA 58E
连接器或母接头
空心轴(盲孔), 法兰 Ø 58mm
14位/39位 单圈/多圈;
空心轴(盲孔):Ø 12mm, 14或15mm;
带紧定套 : Ø 6, 6.35 (1/4''), 7, 8, 9.525 (3/8''), 10毫米;
协议 PROFIBUS-DPV2
设备子协议可切换,Class3,4
线驱动:电流隔离 (RS485)
- Endra® 技术:免维护、无污染
- PROFIBUS,多圈或者单圈
- 单圈/多圈(最大14位/39位)
- 具备32位处理器的前瞻性技术
- 双色LED指示运行状态和总线状态
- 设备子协议可切换,Class3,4
最大16,384步/圈(14位)
多圈分辨率最大达39位
说明: 使用空心轴套管
轴长: 17 mm
最小插入深度: 10 mm
最大插入深度: 19 mm
轴允许最大负载径向: 80 N
轴允许最大负载轴向: 50 N
说明: 使用空心轴套管
轴长: 17 mm
最小插入深度: 10 mm
最大插入深度: 19 mm
轴允许最大负载径向: 80 N
轴允许最大负载轴向: 50 N
说明: 使用空心轴套管
轴长: 17 mm
最小插入深度: 10 mm
最大插入深度: 19 mm
轴允许最大负载径向: 80 N
轴允许最大负载轴向: 50 N
说明: 使用空心轴套管
轴长: 17 mm
最小插入深度: 10 mm
最大插入深度: 19 mm
轴允许最大负载径向: 80 N
轴允许最大负载轴向: 50 N
说明: 使用空心轴套管
轴长: 17 mm
最小插入深度: 10 mm
最大插入深度: 19 mm
轴允许最大负载径向: 80 N
轴允许最大负载轴向: 50 N
说明: 使用空心轴套管
轴长: 17 mm
最小插入深度: 10 mm
最大插入深度: 19 mm
轴允许最大负载径向: 80 N
轴允许最大负载轴向: 50 N
轴长: 17 mm
最小插入深度: 10 mm
最大插入深度: 19 mm
轴允许最大负载径向: 80 N
轴允许最大负载轴向: 50 N
轴长: 17 mm
最小插入深度: 10 mm
最大插入深度: 19 mm
轴允许最大负载径向: 80 N
轴允许最大负载轴向: 50 N
轴长: 17 mm
最小插入深度: 10 mm
最大插入深度: 19 mm
轴允许最大负载径向: 80 N
轴允许最大负载轴向: 50 N
消耗电流: typ. 100 mA (24 VDC)
功耗: max. 2.5 W
组态软件
软件下载
您需要的STEP文件没有被列出:
需要STEP文件 这里
描述 | |
---|---|
DB4 | 轴向, 1x M8, 4-pin; 1x M12, 5-pin; 1x M12, 4-pin, |
- Compact design
- Very high shaft loading
- Can be connected flexibly
- Can be switched between class 3 and 4
- Absolute encoders with flange Ø 36 mm / Ø 58 mm
- Single-/Multiturn (16/43 bit)
- Ground-breaking technology 32 Bit processor
- Very high shaft loading, IP67
- EnDra® Multiturn technology: No gears, no battery
- QuattroMag® Singleturn technology: High precision +/- 0,0878°
- Incremental and absolute encoders
- Digital shaft copying
- Made in Germany
- Motorfeedback
- Position Measurement Systems
GSD file for Class4 encoder release V1.2 WDGA absolut with Profibus DP (up to DPV2).
By downloading and using software and apps
from this homepage, I agree to the GTC and
the supplementary software clause.
Demo program (for S7 controllers) for Class4 encoder WDGA absolute with Profibus DP.
The demo program is just an example.
By downloading and using software and apps
from this homepage, I agree to the GTC and
the supplementary software clause.
Declaration from the PROFIBUS-Nutzerorganisation for the WDGA PROFIBUS for Wachendorff Automation GmbH & Co. KG
轴适配器 M12 WDGWA10M12
可用于空心轴通孔编码器和空心轴盲孔编码器Ø 10 mm,
或联轴器直径10mm时,
M12线
STEP file: WDGWA10M12.stp
轴适配器 M16 WDGWA10M16
可用于空心轴通孔编码器和空心轴盲孔编码器Ø 10 mm,
或联轴器直径10mm时,
M16线
STEP file: WDGWA10M16.stp
Here you find a list of our distributors worldwide