deenfresitcntr
WDGA 58A CANopen 带电流隔离

磁性绝对值编码器, CANopen WDGA 58A,
带电流隔离;
实心轴编码,
夹紧法兰
外壳:Ø 58mm

16位/43位 单圈/多圈;
轴:Ø 6mm, Ø 8mm, Ø 10mm, Ø 3/8"
遵循CiA 301通信协议
编码器 CiA 406 V3.2  Class C2 设备协议;
二进制代码

数据手册 General technical data absolute encoders CANopen (PDF 269 kB)
Drehgeber WDGA58A CANopen galv
特点
  • CANopen
    - 遵循CiA 301通信协议
    - 编码器 CiA 406 V3.2  Class C2 设备协议
  • 状态指示灯(CIA303-3)
  • 客户端软件中的标准设置可以通过LSS(CiA 305)和SDO协议进行修改,如PDOs,比例,心跳协定,节点ID,波特率等。
产品详细说明
法兰
同步法兰
外壳
Ø 58 mm
镀铬钢,磁性屏蔽
分辨率
单圈分辨率

65,536步/圈 (16位)

多圈分辨率

最大达32位
高精度可达高达43位

轴径
Ø 6 mm
说明: 建议: 注意: AAO=整体防护IP67
轴长: 12 mm
轴允许最大负载径向: 125 N
轴允许最大负载轴向: 120 N
Ø 8 mm
说明: 建议: 注意: AAO=整体防护IP67
轴长: 19 mm
轴允许最大负载径向: 125 N
轴允许最大负载轴向: 120 N
Ø 10 mm
轴长: 20 mm
轴允许最大负载径向: 220 N
轴允许最大负载轴向: 120 N
Ø 9.525 mm
说明: 建议: 注意: AAO=整体防护IP67
轴长: 20 mm
轴允许最大负载径向: 220 N
轴允许最大负载轴向: 120 N
最大运行速度
8000 rpm
供电电压
10 VDC ~ 32 VDC
消耗电流: typ. 100 mA
功耗: max. 1 W
工作温度
-40°C ~ +85°C
存储温度
-40°C ~ +100°C
防护等级
外壳: IP65, IP67; 主轴密封: IP65
须知

状态指示灯
 LED状态信号的示范

组态软件
 软件下载

手册
 手册

STEP查看器/STEP数据:

您需要的STEP文件没有被列出:
需要STEP文件 这里

描述
CB5 轴向, 5-pin, 屏蔽线与编码器外壳连接
分配
(+) Vcc2
GND3
CANHigh4
CANLow5
CANGND/屏蔽1
STEP查看器/STEP数据:

您需要的STEP文件没有被列出:
需要STEP文件 这里

描述
CC5 径向, 5-pin, 屏蔽线与编码器外壳连接
分配
(+) Vcc2
GND3
CANHigh4
CANLow5
CANGND/屏蔽1
STEP查看器/STEP数据:

您需要的STEP文件没有被列出:
需要STEP文件 这里

描述
DB5 轴向, 5-pin, 屏蔽线与编码器外壳连接
分配
母接头M12x1, 5-pin
(+) Vcc2
GND3
CANHigh4
CANLow5
CANGND/屏蔽1
连接器M12x1, 5-pin
(+) Vcc2
GND3
CANHigh4
CANLow5
CANGND/屏蔽1
STEP查看器/STEP数据:

您需要的STEP文件没有被列出:
需要STEP文件 这里

描述
L2 轴向, 屏蔽线与编码器外壳连接
分配
(+) Vcc棕色
GND白色
CANHigh绿色
CANLow黄色
CANGND/屏蔽屏蔽线
STEP查看器/STEP数据:

您需要的STEP文件没有被列出:
需要STEP文件 这里

描述
L3 径向, 屏蔽线与编码器外壳连接
分配
(+) Vcc棕色
GND白色
CANHigh绿色
CANLow黄色
CANGND/屏蔽屏蔽线
General technical Data and safety instructions absolute encoders WDGA CANopen
General technical Data and safety instructions absolute encoders WDGA CANopen

Handout Absolute encoders WDGA
Handout Absolute encoders WDGA

  • Absolute encoders with flange Ø 36 mm / Ø 58 mm
  • Single-/Multiturn (16/43 bit)
  • Ground-breaking technology 32 Bit processor
  • Very high shaft loading, IP67
  • EnDra® Multiturn technology: No gears, no battery
  • QuattroMag® Singleturn technology: High precision +/- 0,0878°

Short-Catalogue Encoders and systems
Short-Catalogue Encoders and systems

  • Incremental and absolute encoders
  • Digital shaft copying
  • Made in Germany
  • Motorfeedback
  • Position Measurement Systems

HALT Test
The HALT-Test

Web-processing industry
Web-processing industry

Quality assurance in the ongoing process 

Delivery times and service
Delivery times and service

of Wachendorff Automation GmbH & Co. KG

Handbuch WDGA CANopen
Manual WDGA CANopen

Assembly instructions for WDGA absolute encoder CANopen galvanic isolation
Assembly instructions for WDGA absolute encoder CANopen galvanic isolation, CANopen LIFT galvanic isolation

Technical Note deutsch
Technical Note WDGA CANopen

deutsch

Technical Note english
Technical Note WDGA CANopen

english

EDS File Singleturn
EDS file

EDS file for encoder absolute WDGA singleturn, CANopen.

By downloading and using software and apps
from this homepage, I agree to the GTC and
the supplementary software clause.

EDS file for encoder absolute WDGA multiturn, CANopen
EDS file

EDS file for encoder absolute WDGA multiturn, CANopen.

By downloading and using software and apps
from this homepage, I agree to the GTC and
the supplementary software clause.

EC Konformitätserklärung Drehgeber : EC declaration of conformity encoder
EU declaration of conformity absolute encoder WDGA 2.0 CAN/SSI

for Wachendorff Automation GmbH & Co. KG.

UKCA declaration of conformity absolute encoder WDGA 2.0 CAN/SSI
UKCA declaration of conformity absolute encoder WDGA 2.0 CAN/SSI

for Wachendorff Automation GmbH & Co. KG.

UL Certificates for Wachendorff Automation Products 2014-03-28
UL Certificates

for Wachendorff Automation products.

REACH regulation
REACH- and RoHS regulation of the EU

Informationen

ISO Certificate DIN EN 9001:2015
ISO Certificate DIN EN 9001:2015

BGZ0000KIT-ZVK

Starter kit CANopen

for absolute encoder WDGA

CANUSBANALYZER Drehgeber Absolut CANopen
CANUSBANALYZER

PEAK CAN-USB-Analyzer

for absolute encoder WDGA

KIS567 Drehgeber Kabeldose
KIS-5-67

自我装配的连接器 KIS-5-67 :
M12 x 1, 适用于连接器出线的 CB5/CC5, 5-pin, IP67, WDGA CANopen

直头连接器

 STEP文件

KISA567 Drehgeber Kabeldose
KISA-5-67

自我装配的连接器 KISA-5-67 :
M12 x 1, 适用于连接器出线的 CB5/CC5, 5pin, IP67 WDGA CANopen
 

弯头连接器

KID567 Drehgeber Kabeldose
KID-5-67

自我装配的母头连接器 KID-5-67 :
M12 x 1, 适用于连接器出线的 CB5/CC5, 5pin, IP67, WDGA CANopen

直母头连接器

KIDA567 Drehgeber Kabeldose
KIDA-5-67

自我装配的母头连接器 KIDA-5-67 :
M12 x 1, 适用于连接器出线的 CB5/CC5, 5pin, IP67, WDGA CANopen

弯头母头连接器

CVKA567 Drehgeber Kabeldose
CVKA-5-67

存根/总线电缆 M12 x 1,
适用于连接器出线的 CB5/CC5 WDGA CANopen

弯头连接器 - 电缆 - 弯头母头连接器

CVK567 Drehgeber Kabeldose
CVK-5-67

存根/总线电缆 M12 x 1,
适用于连接器出线的 CB5/CC5 WDGA CANopen

直头连接器 - 电缆 - 直母头连接器

CTA216701 Drehgeber Kabeldose
CTA-21-67-01

T型连接器, M12 x 1,
适用于连接器出线的 CB5/CC5 WDGA CANopen

2 母头连接器, 1 连接器

CYA216701 Drehgeber Kabeldose
CYA-21-67-01

Y型连接器 M12 x 1,
适用于连接器出线的 CB5/CC5 WDGA CANopen

2 母头连接器, 1 连接器

CEW12067S Drehgeber Kabeldose
CEW-120-67-S

终端电阻120欧姆, M12 x 1,
适用于连接器出线的 CB5/CC5 WDGA CANopen

连接器

CEW12067B Drehgeber Kabeldose
CEW-120-67-B

终端电阻120欧姆, M12 x 1
适用于连接器出线的 CB5/CC5 WDGA CANopen

母头连接器

SP300 Drehgeber Spannexzenter
SP-3-00

偏心夹紧SP-3-00

合适的增量式编码器 WDG 40A, 50B, 58T, WDGI 58A, 58B, 58C, 58D, 58K, 63B, WDGP 36A, WDGP 58A, WDGP 58B.
合适的绝对值编码器 WDGA 36A, WDGA 58A, WDGA 58B.

STEP file

MG58A Drehgeber Montageglocke 01
MG58A

安装钟MG58A

合适的增量式编码器 WDGI 58A.
合适的绝对值编码器 WDGA 58A.

STEP file

ST27 Kupplung Drehgeber
ST27

接头型联轴器 ST27

用于与轴直径6毫米或10毫米编码器。

PK20 Kupplung Drehgeber
PK20

切口型联轴器 PK20

用于与轴直径6毫米编码器。

PK24 Kupplung Drehgeber
PK24

切口型联轴器 PK24

用于与轴直径6毫米,8毫米或10毫米编码器。

FSK22 Kupplung Drehgeber
FSK22

弹簧垫圈联轴器 FSK22

用于与轴直径6毫米,8毫米或12毫米编码器。

WK22 Kupplung Drehgeber
WK22

螺旋联轴器 WK22

用于与轴直径6毫米编码器。

WK24 Kupplung Drehgeber
WK24

螺旋联轴器 WK24

用于与轴直径6毫米,8毫米,10毫米或12毫米编码器。

 STEP-Download WK240610

WK32 Kupplung Drehgeber
WK32

螺旋联轴器 WK32

用于与轴直径6毫米或10毫米编码器。

BK29 Kupplung Drehgeber
BK29

波纹管联轴器 BK29

用于与轴直径6毫米,8毫米,10毫米或12毫米*编码器。
Max. offset of shafts radial: ± 0,25 mm or ± 0,30 mm*
Torsion spring stiffness: 150 Nm/rad or 130 Nm/rad*

FB29B Kupplung Drehgeber
FB29B

波纹管联轴器 FB29B

用于与轴直径4毫米,6毫米,8毫米,10毫米或12毫米编码器。

DSK29 Kupplung Drehgeber
DSK29

弹性联轴器 DSK29

用于与轴直径6毫米,8毫米或10毫米编码器。
No moving parts, thermally and electrically insulating, smooth running, maintenance-free.
Good resistance to
Gasoline, oil, benzene, toluene, aromatic and non aromatic hydrocarbons, alcohols, glycols, solvents and many chemicals.

 STEP Download DSK290606

 STEP Download DSK290610

DSK38 Kupplung Drehgeber
DSK38

弹性联轴器 DSK38

用于与轴直径6毫米,8毫米,10毫米或12毫米编码器。
No moving parts, thermally and electrically insulating, smooth running, maintenance-free.
Good resistance to
Gasoline, oil, benzene, toluene, aromatic and non aromatic hydrocarbons, alcohols, glycols, solvents and many chemicals.

STEP-Datei DSK380606

DSK48 Kupplung Drehgeber
DSK48

弹性联轴器 DSK48

用于与轴直径10毫米,12毫米或14毫米编码器。
No moving parts, thermally and electrically insulating, smooth running, maintenance-free.
Good resistance to
Gasoline, oil, benzene, toluene, aromatic and non aromatic hydrocarbons, alcohols, glycols, solvents and many chemicals.

STEP download DSK481012

WDGA 58A 带电流隔离功能的CANopen绝对值编码器可以提供整体防护IP67的型号。
最大转速:             3500 rpm
轴允许最大负载:  轴向100N;径向110N
启动力矩:             常温下大约4Ncm

WDGA 58A 带电流隔离功能的CANopen绝对值编码器也可以提供集成了120欧姆终端电阻的型号。

WDGA 58A 带电流隔离功能的CANopen shaft: Ø 6 mm is also available with a shortened shaft L = 10 mm. 

编码器综合技术参数

绝对值编码器技术参数

电气连接

电缆出线
连接器
接线盖
###field_abs_ah_bestcode###

您选择的订货型号

单圈多圈接口软件编码电压电流隔离接线方式特殊要求
WDGA 58ACOAB01
distributors
For further information please contact our local distributor.
Here you find a list of our distributors worldwide
您希望获取产品的报价或者希望我们回电。 Yes
联系我们