磁性绝对值编码器, EtherNet/IP WDGA 58E
总线盖 3x M12x1
空心轴(盲孔), 法兰 Ø 58mm
16位/43位 单圈/多圈;
空心轴(盲孔): Ø 12mm, 14或15mm;
带紧定套 : Ø 6, 6.35 (1/4''), 7, 8, 9.525 (3/8''), 10mm;
协议 EtherNet/IP™
Classes: Position Sensor, DLR
- EtherNet/IP™, Conformance tested according to version CT-18
- Compact design with bus cover
- EnDra®: maintenance-free and environmentally friendly
- Single-/Multiturn (max. 16 bit/43 bit)
- 2 color duo LEDs to indicate operating status and bus status as well as 2 L/A LEDs
- Highest bearing loads up to 80 N radial, 50 N axial
- DLR (Device-Level-Ring) to increase system availability through redundant network communication
- Full scalability thanks to round axis function, for binary and non-binary resolutions, as well as for non-complete multiturn rotations (gear calculation).
- IP address individually via DHCP or predefined
- Configurable via integrated web server:
- IP address
- Subnet mask
- Gateway address
- Encoder parameters readable
- Firmware update
最大65,536步/圈(16位)
多圈分辨率43位
说明: 使用空心轴套管
轴长: 12 mm
最小插入深度: 9.5 mm
最大插入深度: 14 mm
轴允许最大负载径向: 80 N
轴允许最大负载轴向: 50 N
说明: 使用空心轴套管
轴长: 12 mm
最小插入深度: 9.5 mm
最大插入深度: 14 mm
轴允许最大负载径向: 80 N
轴允许最大负载轴向: 50 N
说明: 使用空心轴套管
轴长: 12 mm
最小插入深度: 9.5 mm
最大插入深度: 14 mm
轴允许最大负载径向: 80 N
轴允许最大负载轴向: 50 N
说明: 使用空心轴套管
轴长: 12 mm
最小插入深度: 9.5 mm
最大插入深度: 14 mm
轴允许最大负载径向: 80 N
轴允许最大负载轴向: 50 N
说明: 使用空心轴套管
轴长: 12 mm
最小插入深度: 9.5 mm
最大插入深度: 14 mm
轴允许最大负载径向: 80 N
轴允许最大负载轴向: 50 N
说明: 使用空心轴套管
轴长: 12 mm
最小插入深度: 9.5 mm
最大插入深度: 14 mm
轴允许最大负载径向: 80 N
轴允许最大负载轴向: 50 N
轴长: 12 mm
最小插入深度: 9.5 mm
最大插入深度: 14 mm
轴允许最大负载径向: 80 N
轴允许最大负载轴向: 50 N
轴长: 12 mm
最小插入深度: 9.5 mm
最大插入深度: 14 mm
轴允许最大负载径向: 80 N
轴允许最大负载轴向: 50 N
轴长: 12 mm
最小插入深度: 9.5 mm
最大插入深度: 14 mm
轴允许最大负载径向: 80 N
轴允许最大负载轴向: 50 N
消耗电流: typ. 125 mA
功耗: typ. 3 W
General information about EtherNet/IP
EtherNet/IP Conformance Tested according to version CT-18
EtherNet/IP Specification Vol 2, Ed 1.29
CIP Specification Vol 1, Ed 3.31
Adjustable parameters
- Number of steps per revolution
- Number of revolution
- Scalin
- Direction of rotation
- CAMs
- Gear Ratio
- Preset
- Counting direction
- Resolution
- Unit Speed
- IP address
- Position
- Position Limit
- Warning messages ("Frequency Exceeded" and "Position Limits Exceeded")
Objects (CIP Objects)
- Identity Object
- Message Router
- Assembly Object
- Connection Manager
- Position Sensor Object
- Qos Object
- TCP/IP Interface Object
- EtherNet Link Object
EtherNet/IP Features
- DLR (Device Level Ring) possible
- Qos (Quality of Service) possible
- ACD (Address Conflict Detection)
- Multicast and unicast capability
Licensing declaration
IP >= V1.00
Licensing declaration
描述 | |
---|---|
BI2 | 总线盖 3x M12x1 |
Fast and compact
Protocol selection by click
- Absolute encoders with flange Ø 36 mm / Ø 58 mm
- Single-/Multiturn (16/43 bit)
- Ground-breaking technology 32 Bit processor
- Very high shaft loading, IP67
- EnDra® Multiturn technology: No gears, no battery
- QuattroMag® Singleturn technology: High precision +/- 0,0878°
- Incremental and absolute encoders
- Digital shaft copying
- Made in Germany
- Motorfeedback
- Position Measurement Systems
of Wachendorff Automation GmbH & Co. KG
PROFINET IO; EtherNet/IP; EtherCAT; Universal IE
for WDGA absolut encoders with EtherNet/IP.
By downloading and using software and apps
from this homepage, I agree to the GTC and
the supplementary software clause.
for Wachendorff Automation GmbH & Co. KG
for Wachendorff Automation GmbH & Co. KG.
for Wachendorff Automation GmbH & Co. KG.
for Wachendorff Automation products.
Informationen
Ready-made Industrial Ethernet connection cable KIE-4-67-RJ:
suitable for encoders WDGA with bus cover BI2 (PROFINET, EthertNet/IP, EtherCAT, universal IE)
Plug M12 - cable - plug RJ45
Ready-made Industrial Ethernet connection cable KIE-4-67-DC:
suitable for encoders WDGA with bus cover BI2 (PROFINET, EthertNet/IP, EtherCAT, universal IE)
Plug M12 - cable - plug M12
母头连接器IP67+IP69K, KIZ-4-67 :
给电源, 4pin
直头母头连接器带屏蔽电缆。
轴适配器 M6 WDGWA10M06
可用于空心轴通孔编码器和空心轴盲孔编码器Ø 10 mm,
或联轴器直径10mm时,
M6线
轴适配器 M8 WDGWA10M08
可用于空心轴通孔编码器和空心轴盲孔编码器Ø 10 mm,
或联轴器直径10mm时,
M8线
轴适配器 M10 WDGWA10M10
可用于空心轴通孔编码器和空心轴盲孔编码器Ø 10 mm,
或联轴器直径10mm时,
M10线
轴适配器 M12 WDGWA10M12
可用于空心轴通孔编码器和空心轴盲孔编码器Ø 10 mm,
或联轴器直径10mm时,
M12线
STEP file: WDGWA10M12.stp
轴适配器 M14 WDGWA10M14
可用于空心轴通孔编码器和空心轴盲孔编码器Ø 10 mm,
或联轴器直径10mm时,
M14线
轴适配器 M16 WDGWA10M16
可用于空心轴通孔编码器和空心轴盲孔编码器Ø 10 mm,
或联轴器直径10mm时,
M16线
STEP file: WDGWA10M16.stp
轴适配器 M20 WDGWA10M20
可用于空心轴通孔编码器和空心轴盲孔编码器Ø 10 mm,
或联轴器直径10mm时,
M20线
用于内径Ø 12mm的空心轴轴套
可用于空心轴通孔编码器WDGI 58H和空心轴盲孔编码器WDGI 58E、WDGA 58E
Here you find a list of our distributors worldwide