deenfresitcntr
WDGA 36J RS485

磁性绝对值编码器, RS485 WDGA 36J,
整体防护等级可达IP67和IP69K(高压/蒸汽)
极高的轴负载径向300N, 轴向300N

实心轴编码, 伺服法兰 Ø 36mm

16位/32位 单圈/多圈;
轴:Ø 10mm;
CRC校验

数据手册 General technical data absolute encoders RS485 (PDF 294 kB)
Drehgeber encoder WDGA36J RS485
特点
  • Endra®多圈技术:免维护、无污染
  • RS485
  • 单圈/多圈(ST+MT最大32位)
  • 具备32位处理器的前瞻性技术
  • 双色LED指示运行状态
  • CRC校验
产品详细说明
法兰
伺服法兰
外壳
Ø 36 mm
不锈钢
分辨率
单圈分辨率

最大65,536步/圈(16位)

多圈分辨率

高达32位

轴径
Ø 10 mm
轴长: 20 mm
轴允许最大负载径向: 300 N
轴允许最大负载轴向: 300 N
最大运行速度
6000 rpm
供电电压
4.75 VDC ~ 32 VDC
消耗电流: typ. 50 mA
功耗: max. 0.5 W
4.75 VDC ~ 5.5 VDC
消耗电流: typ. 80 mA
功耗: max. 0.44 W
工作温度
-40°C ~ +85°C
存储温度
-40°C ~ +100°C
防护等级
整体防护等级可 IP67 和 IP69K
STEP查看器/STEP数据:

您需要的STEP文件没有被列出:
需要STEP文件 这里

描述
L2 轴向, 屏蔽线与编码器外壳连接
分配
S- (GND)白色
S+ (DCin)棕色
A (DATA+)灰色
B (DATA-)粉色
PRESET蓝色
DIR红色
屏蔽外壳
STEP查看器/STEP数据:

您需要的STEP文件没有被列出:
需要STEP文件 这里

描述
L3 径向, 屏蔽线与编码器外壳连接
分配
S- (GND)白色
S+ (DCin)棕色
A (DATA+)灰色
B (DATA-)粉色
PRESET蓝色
DIR红色
屏蔽外壳
STEP查看器/STEP数据:

您需要的STEP文件没有被列出:
需要STEP文件 这里

描述
CB8 轴向, 8-pin, 屏蔽线与编码器外壳连接
分配
S- (GND)1
S+ (DCin)2
A (DATA+)5
B (DATA-)6
PRESET7
DIR8
屏蔽外壳
STEP查看器/STEP数据:

您需要的STEP文件没有被列出:
需要STEP文件 这里

描述
CC8 径向, 8-pin, 屏蔽线与编码器外壳连接
分配
S- (GND)1
S+ (DCin)2
A (DATA+)5
B (DATA-)6
PRESET7
DIR8
屏蔽外壳
General technical Data  and safety instructions absolute encoders WDGA RS485
General technical Data and safety instructions absolute encoders WDGA RS485

Motor feedback installation solutions
Motor feedback installation solutions with EnDra® Technology

...to be directly installed in motors.

Handout Absolute encoders WDGA
Handout Absolute encoders WDGA

  • Absolute encoders with flange Ø 36 mm / Ø 58 mm
  • Single-/Multiturn (16/43 bit)
  • Ground-breaking technology 32 Bit processor
  • Very high shaft loading, IP67
  • EnDra® Multiturn technology: No gears, no battery
  • QuattroMag® Singleturn technology: High precision +/- 0,0878°

Short-Catalogue Encoders and systems
Short-Catalogue Encoders and systems

  • Incremental and absolute encoders
  • Digital shaft copying
  • Made in Germany
  • Motorfeedback
  • Position Measurement Systems

Anwendungsbericht Prüfstandbau - Application report Test Bench
Test Bench

WDGA absolute encoder as reference sensor

HALT Test
The HALT-Test

Delivery times and service
Delivery times and service

of Wachendorff Automation GmbH & Co. KG

Assembly instructions for WDGA absolute encoder RS485
Assembly instructions for WDGA absolute encoder RS485

EC Konformitätserklärung Drehgeber : EC declaration of conformity encoder
EU declaration of conformity absolute encoder WDGA 2.0 CAN/SSI

for Wachendorff Automation GmbH & Co. KG.

UKCA declaration of conformity absolute encoder WDGA 2.0 CAN/SSI
UKCA declaration of conformity absolute encoder WDGA 2.0 CAN/SSI

for Wachendorff Automation GmbH & Co. KG.

UL Certificates for Wachendorff Automation Products 2014-03-28
UL Certificates

for Wachendorff Automation products.

REACH regulation
REACH- and RoHS regulation of the EU

Informationen

ISO Certificate DIN EN 9001:2015
ISO Certificate DIN EN 9001:2015

KI867EIA Drehgeber Kabeldose
KI-8-67-EIA

母头连接器 KI-8-67-EIA :
适用于连接器出线的 CB8/CC8, 8pin, IP67, WDGA RS485

直头母头连接器带屏蔽电缆,屏蔽连接

KIA867EIA Drehgeber Kabeldose
KIA-8-67-EIA

母头连接器 KIA-8-67-EIA:
适用于连接器出线的 CB8/CC8, 8pin, IP67, WDGA RS485

弯头母头连接器带屏蔽电缆,屏蔽连接

SP300 Drehgeber Spannexzenter
SP-3-00

偏心夹紧SP-3-00

合适的增量式编码器 WDG 40A, 50B, 58T, WDGI 58A, 58B, 58C, 58D, 58K, 63B, WDGP 36A, WDGP 58A, WDGP 58B.
合适的绝对值编码器 WDGA 36A, WDGA 58A, WDGA 58B.

STEP file

ST27 Kupplung Drehgeber
ST27

接头型联轴器 ST27

用于与轴直径6毫米或10毫米编码器。

PK24 Kupplung Drehgeber
PK24

切口型联轴器 PK24

用于与轴直径6毫米,8毫米或10毫米编码器。

FSK22 Kupplung Drehgeber
FSK22

弹簧垫圈联轴器 FSK22

用于与轴直径6毫米,8毫米或12毫米编码器。

WK24 Kupplung Drehgeber
WK24

螺旋联轴器 WK24

用于与轴直径6毫米,8毫米,10毫米或12毫米编码器。

 STEP-Download WK240610

WK32 Kupplung Drehgeber
WK32

螺旋联轴器 WK32

用于与轴直径6毫米或10毫米编码器。

BK29 Kupplung Drehgeber
BK29

波纹管联轴器 BK29

用于与轴直径6毫米,8毫米,10毫米或12毫米*编码器。
Max. offset of shafts radial: ± 0,25 mm or ± 0,30 mm*
Torsion spring stiffness: 150 Nm/rad or 130 Nm/rad*

FB29B Kupplung Drehgeber
FB29B

波纹管联轴器 FB29B

用于与轴直径4毫米,6毫米,8毫米,10毫米或12毫米编码器。

DSK29 Kupplung Drehgeber
DSK29

弹性联轴器 DSK29

用于与轴直径6毫米,8毫米或10毫米编码器。
No moving parts, thermally and electrically insulating, smooth running, maintenance-free.
Good resistance to
Gasoline, oil, benzene, toluene, aromatic and non aromatic hydrocarbons, alcohols, glycols, solvents and many chemicals.

 STEP Download DSK290606

 STEP Download DSK290610

DSK38 Kupplung Drehgeber
DSK38

弹性联轴器 DSK38

用于与轴直径6毫米,8毫米,10毫米或12毫米编码器。
No moving parts, thermally and electrically insulating, smooth running, maintenance-free.
Good resistance to
Gasoline, oil, benzene, toluene, aromatic and non aromatic hydrocarbons, alcohols, glycols, solvents and many chemicals.

STEP-Datei DSK380606

Federarm für Drehgeber Spring-loaded arm for encoder LMSMA30030x
WDGMA3003x

弹簧杆适合轴编码器  36A 和 36J

用于长度测量

Federarm für Drehgeber Spring-loaded arm for encoder LMSMA31031
WDGMA3103x

弹簧杆适合轴编码器 36A 和 36J

用于长度测量

MR200GR Messrad Drehgeber Measuring wheel encoder
MR150GR06

测量轮 MR150GR06

周长150mm,
面:: O-ring 3,5 mm, material NBR70
应用领域:Wood, metal, conveyor belts, paper, textiles.
用于与轴直径6毫米编码器

MR200KR Messrad Drehgeber
MR200KR

测量轮 MR200KR

周长200mm,
面:金属,滚花
应用领域:纸板,木板,(纺织品)
用于与轴直径6毫米或10毫米编码器。

MRA200KR Messrad Drehgeber
MRA200KR

测量轮 MRA200KR

周长200mm,
面:金属,滚花
应用领域: 纸板,木材,纺织品,橡胶,软塑料。
用于与轴直径6毫米,10毫米或12毫米编码器。

 STEP文件 MRA200KR06 钻孔6毫米

MR200KH Messrad Drehgeber
MR200KH

测量轮 MR200KH

周长200mm,
面:塑料(的Hytrel,平稳)
应用领域:塑料,油漆表面,纸张,纸板,木材,金属,纺织品。
用于与轴直径6毫米或10毫米编码器。

MRA200KH Messrad Drehgeber
MRA200KH

测量轮 MRA200KH

周长200mm,
面:塑料(聚氨酯,平稳)
应用领域:纸板,木材,软塑料,纺织,皮革,造纸,线材,型材,脂润滑金属,油漆表面。
用于与轴直径6毫米,10毫米或12毫米编码器。

 STEP文件 MRA200KH10 钻孔10毫米

MR200NG Messrad Drehgeber
MR200NG

测量轮 MR200NG

周长200mm,
面:橡胶防滑钉
应用领域:纺织品。
用于与轴直径6毫米或10毫米编码器。

MRA200NG Messrad Drehgeber
MRA200NG

测量轮 MRA200NG

周长200mm,
面:塑料(聚氨酯,橡胶防滑钉)
应用领域:塑料,纸张,纸板,木材,纺织品,羊毛,地毯,电缆测量。
用于与轴直径6毫米,10毫米或12毫米编码器。

MR200KG Messrad Drehgeber
MR200KG

测量轮 MR200KG

周长200 mm,
面:塑料(的Hytrel,有凹槽)
应用领域:塑料,油漆表面,纸张,纸板,木材,金属,纺织品。
用于与轴直径6毫米或10毫米编码器。

MRA200KG Messrad Drehgeber
MRA200KG

测量轮 MRA200KG

周长200 mm,
面:塑料(聚氨酯,有凹槽)
应用领域:油漆表面,塑料,纸张,纸板,木材,纺织品,玻璃,地板。
用于与轴直径6毫米,10毫米或12毫米编码器。

编码器综合技术参数

绝对值编码器技术参数

电气连接

电缆出线
连接器
接线盖
###field_abs_ah_bestcode###

您选择的订货型号

单圈多圈接口软件编码电压电流隔离接线方式
WDGA 36JEIAB0
distributors
For further information please contact our local distributor.
Here you find a list of our distributors worldwide
您希望获取产品的报价或者希望我们回电。 Yes
联系我们